|
|
|
Copper–Nickel
And Other Alloys For
Desalination Plant
|
|
Course
Outline |
|
Module 1. |
Introduction rod. |
|
Module
2. |
Material Surveys. |
|
Module
3. |
Lower cost water by proper materials selection. |
|
Module
4. |
Corrosion resistance of copper–base alloys in hot
de–aerated seawater. |
|
Module
5. |
Attaching 90 – 10 copper–nickel alloy lining sheet to
mild–steel components by the MIG spot–welding technique. |
|
Module 6. |
Copper–nickel alloys Engineering properties. |
|
The
Choice Of Materials For Desalination Plant |
 |
The
selection of materials for the construction of desalination plant is a
vital consideration, particularly for the distillation processes, since it
markedly influences the technical and economic performance of the plant. |
|
|
A balance must be struck between
materials which give exceptionally high reliability with a high water cost
and cheaper materials with lower reliability and an initially low water
cost. |
|
|
Achieving this balance requires a knowledge
of the properties of the alloys available and a fund of information about
their effectiveness under service conditions. |
|
|
Go
To Top Page |
